1.5 HP D.C. electrical motor. All motors are thermally protected.
BODY COVER:
STURDY 18 GAUGE
STEEL COVER WITH DOOR ON SIDE TO ALLOW ACCESS TO THE ELECTRICAL
MOTOR AND DRIVE SYSTEM.
BASIC COLORS:
THERE ARE 20
BASIC ENAMEL COLORS TO CHOOSE FROM.
ALL MODELS ARE PRIMERED PRIOR TO PAINTING. ADDITIONAL COLORS $100.00 EXTRA. RANCH LOGO ON 2 SIDES $150.00 EXTRA.
BODY
FRAME:
THE
FRAME OF ALL THE MODELS ARE COMPOSED OF 2 ˝” ANGLE IRON THAT HAS
BEEN BEAD WELDED APPROXIMATELY 1/8” WIDE.
MACHINE WEIGHS APPROXIMATELY 1,000 LBS, WHEN FULLY ASSEMBLED
DRIVE
UNIT:
THE
DRIVE ASSEMBLY IS DRIVEN THROUGH AN ELECTRIC MOTOR, WHICH IS
INCORPORATED WITH A SPEED REDUCTION GEAR BOX.
SPEEDS:
CENTAUR
MAKES ONLY VARIABLE SPEED MINI WALKER MODELS WHICH GOES FROM 0 RPM
UP TO APPROXIMATELY 7 RPM AND ANY RPM BETWEEN THE TWO RANGES, ALSO
FORWARD AND REVERSE.
ARMS:
A
4 WALKER HAS AN ARM LENGTH OF 15 FT. LONG.
A 6 MINI WALKER HAS AN ARM LENGTH OF 20 FT. LONG.
THE ARMS ARE CONSTRUCTED OF 2 ˝” TUBULAR STEEL.
THE HEIGHT OF THE ARMS FROM THE GROUND IS 4’.
EACH ARM COMES EQUIPPED WITH A QUICK RELEASE MECHANISM AND
LEAD WITH A SNAP.
HEAD
SECTION:
THE MINI WALKERS COME EQUIPPED WITH A SOLID OR FOLDING HEAD (OPTIONAL,
$200.00 EXTRA. 4 MINI MODELS ONLY) CONSTRUCTED OF 3” SQUARE
STEEL.
ELECTRICAL
THE
UNIT CAN BE CONNECTED TO ANY 110 OR 220-VOLT ELECTRICAL OUTLET. FOR
110-V WIRING, A 20
SPECIFICATIONS:
AMP
BREAKER IS REQUIRED AT WALKER.
FOR 220-V WIRING, A 40 AMP BREAKER IS REQUIRED AT WALKER.
OPTIONS:
EXTRA
LONG LEADS·
CUSTOM COLORS · PIN STRIPPING · RANCH LOGOS
* A DEPOSIT OF 50% IS
REQUIRED TO START ORDER *
PRIOR TO
SHIPMENT, BALANCE MUST BE PAID IN FULL
MAJOR
CREDIT CARDS ACCEPTED ~ ALL PRICES
ARE SUBJECT TO LOCAL SALES OR USE TAX
For out of state and out of country purchases, we request all payment in advance, which includes freight charge.
Electrical wiring outside machine for control is not guaranteed, as it is subject to interference and interruptions from causes not the fault of the equipment.
Charges will be made for service calls relating to problems outside of our warranty.
WARRANTY: All new machines are guaranteed to be free of manufacturing defects and structural failure for one year from date of sale.
CENTAUR
CORPORATION can add electrical lines or any installations with regard to the walker.
A licensed electrician is suggested for any electrical work needed. Centaur can supply you with an electrician if you so desire (in limited parts of the US only).
This information is accurate as of date of publication, but is
subject to change without notice. Send mail to Centaur@hotwalkers.com with
any questions or comments about our products or our website.
