Motor &  Drive Unit: 1.5 hp d.c. electrical motor. All motors are thermally protected.
Maximum speed: 10 mph.
Body  Cover: Sturdy 18 gauge steel cover with door on side to allow access to the electrical motor and drive system.
Basic Colors: There are 20 basic enamel colors to choose from.   All models are primered prior to painting.  Additional colors $100.00 extra.  Ranch logo on 2 sides $150.00 extra.
Body Frame: The frame of all the models are composed of 2 ½” angle iron that has been bead welded approximately 1/8” wide.  Machine weighs approximately 1,000 lbs, when fully assembled
Drive Unit: The drive assembly is driven through an electric motor, which is incorporated with a speed reduction gear box.
Speeds: Centaur makes only variable speed mini walker models which goes from 0 rpm up to approximately 7 rpm and any rpm between the two ranges, also forward and reverse.
Arms: 4 horse walker has an arm length of 15 ft. Long.  A 6 mini walker has an arm length of 20 ft. Long.  The arms are constructed of 2 ½” tubular steel.  The height of the arms from the ground is 4’.  Each arm comes equipped with a quick release mechanism and lead with a snap.
Head Section: The mini walkers come equipped with a solid or folding head (optional, $200.00 extra. 4 mini models only) constructed of 3” square steel.
Electrical The unit can be connected to any 110 or 220-volt electrical outlet. For 110-v wiring, a 20
Specifications: Amp breaker is required at walker.  For 220-v wiring, a 40 amp breaker is required at walker.
Options: Extra long leads· custom colors · pin stripping · ranch logos

*Deposit of 50% is required to start order *
Prior to shipment, balance must be paid in full
Major credit cards accepted ~ all prices are subject to local sales or use tax

For out of state and out of country purchases, we request all payments in advance, which do include a freight charge.

Electrical wiring outside the machine for control is not guaranteed as it is subject to interference and interruptions from causes not the fault of the equipment.

Charges will be made for service calls relating to problems outside of our warranty.  

Warranty: All new machines are guaranteed to be free of manufacturing defects and structural failure for one year from date of sale.

Centaur Corporation can put in electrical lines or any installations with regard to the walker.

Licensed electrician is suggested for any electrical work needed.  Centaur can supply you with an electrician if you so desire, (in certain parts of the U.S. only).